Now let Qingzhou Jianyuan Machinery Co., Ltd. introduce to you the structure and working principle of the counterattack sand blower.
Counterattack sand blower structure
1. There is a crushing chamber in the machine body and a rotor in the middle of the crushing chamber. There are three blower seats evenly distributed on the rotor. The Z-shaped blow bar is inserted into the blow bar seat. The main shaft passes through the middle of the rotor. The main shaft constitutes an integral rotor through two sets of expansion sleeves and the square disk in the rotor;
2. Both sides of the rotor are respectively provided with a symmetrical counterattack frame composed of an impact frame and the next impact frame, and the upper end of the body is equipped with a balanced feeder that feeds to the inlet. It makes the stone spread evenly in the sand making machine, which not only increases the efficiency, but also uses the full-length direction of the plate hammer to increase the number of hammer strokes, reduce the friction surface, change the striking angle and strength, and reduce the output of powder , Improve the output of granular materials, improve the utilization efficiency of the blower, and reduce the consumption of the blower.
Working principle of counterattack sand machine
Sand beater is a kind of impact machine. When the machine is working, the motor drives the rotor to rotate at a high speed. Under the action of high-speed centrifugal force, it and the other part of the impact block split in an umbrella shape around the turntable, resulting in high-speed impact and high-density crushing. After the stones collide with each other, a repetitive motion pattern is formed between the turntable and the casing, causing multiple collisions, frictions, and crushing, which will be crushed to the required particle size.