Hammer sand making machineFor those who have used it, they all know that the hammer is an important working part of the sand making machinery and equipment. It directly acts on the crushed material and has a high work intensity. This is because of the material, the hard stone needs to be paid attention to, which will be subject to great impact and friction during the crushing process. We all know that friction generates heat. If the hammer head has poor wear resistance and high temperature resistance, it is easier to wear.
1. The reason why the hammer head temperature of the hammer sand making machine is too high
Overheating of the hammer is a common problem in sand making machines, which has a great impact on the service life and work efficiency of the hammer. There are many reasons for the hammer head overheating. Therefore, in order to solve this problem, it is necessary to find out the cause of overheating of the hammer head.
In addition to the friction mentioned above, lubrication is also a big problem. The temperature of the hammer head of the crusher is too high. Check the lubrication of the hammer head to see if there is too much or too little lubricating oil, which will increase friction, resulting in excessive temperature or a certain problem in the quality of lubricating oil. In addition, uneven feeding will cause the hammer crusher to bear uneven force and cause high temperature.
2. Daily maintenance of the hammer head of the sand making machine
The importance of the hammer head to the crusher equipment does not need to be repeated, but in daily work, the protection of the hammer head is more important. Only in the production process, we often encounter some phenomena, such as abnormal noise, knocking sound, production decline, excessive discharge, etc.
If the operator finds an abnormal knocking sound of the sand making machine inside the equipment, he should stop the machine in time to check whether the bolts are tight, whether there is material blockage, whether unbroken objects enter the machine, whether the hammer head hits the liner, etc.
Excessive wear of the wear-resistant hammer, excessively large screen gaps, blockages or breaks, and a reduction in feed with uneven output may result in reduced output particles or excessive size. Replace the hammer head or the sieve bar, remove the blockage or adjust the feeding system to make the feeder feed evenly.
Only when the problem is found and solved, the sand machine can produce stable production for a long time. Many phenomena are related to the hammer. Therefore, we need high temperature and wear resistant hammers.
We talked about the application of the hammer head of the hammer sand making machine, the reason why the temperature of the hammer head will be too high, and the daily maintenance of the hammer head. Hope to enrich your product knowledge. It is convenient for you to choose and use good equipment in the future.